Make an enquiry
0

My Enquiry List
(0 products)

You can tell us about any specific requirements including finishes and project requirements once you confirm your enquiry list below.

    Stay in touch

    Leave your details and we'll keep you in the loop with all the latest news and podcast releases.

    * This field is required
    * This field is required
    * This field is required
    * This field is required

    We'll need some info

    Drop us your details below for access to our CAD library.

    Wet Spray

    Furnitubes’ standard wet spray application for painted metal products is aligned to
    ISO 12944: Paints and varnishes.

    manchester-bollards-in-a-row

    Corrosive environments:

    We offer paint protection and durability up to the following environmental classifications, as defined in ISO 12944

    • C4: Industrial and coastal, chemical processing plants

    This is our standard paint specification, as applied to all products unless specifically requested otherwise.

    • C5I: Industrial areas with high humidity and aggressive atmospheres
    • C5M: Marine, offshore, estuaries, coastal areas with high salinity

    Paint application suitable for C5 environments can be supplied on specific request.

    aluminium city bollard in public realm scheme

    Design Life

    Durability and design life of the paint system is determined by the specific location and environmental conditions where products are sited, and its resistance to corrosion by local climatic and atmospheric conditions.

    Durability and design life does not extend to factors such as wear and tear from abrasion or any other damage by external forces that may breach the paint surface. Anticipated durability and design life of our standard paint systems, with regular maintenance, and timely and appropriate repairs of any breaches to the original paint coverage, is as follows:

    • C4 Environment Classification: up to 10 years
    • C5I and C5M Environment Classification: up to 10-15 years
    A row of Furnitubes brunel bollard

    Preparation

    To ensure appropriate adhesion and durability of wet spray paint, the base metal is prepared in advance of painting, as suitable to each substrate material. After preparation, our paint system applied comprises these coating products:

    • Primer coat(s):
      2-part epoxy primer, applied to a film thickness range of 80-180 microns in line with manufacturer’s specification
    • Top coat:
      2-pack epoxy acrylic cosmetic finish, full gloss, to any RAL / BS4800 series colour reference, applied to a nominal film thickness of 120 microns.
    4 bell bollards with yellow strips in a row

    Inspection

    All painted products are subject to a visual inspection at each stage of the paint application process, with paint thickness measurements taken to ensure tolerances specified by our paint supplier are adhered to. Scratch testing is undertaken on selected samples to ensure good adhesion between the paint and base metal.

    Maintenance

    We recommend products are removed from the packaging immediately after delivery to site, to avoid the possibility of adverse reactions with surface finishes. We further recommend that painted finishes are checked annually and any accumulated deposits wiped away with a damp cloth and light detergent, and rinsed off with clean water.

    For repair of on-site damage to the painted surfaces, normal touch-up and overpainting principles apply, including rubbing down over and around the damaged area to remove any oxidation deposits and blend in any distinct edges to the broken paint film before the application of appropriate primer and top coats.

    Note: Furnitubes reserves the right to change specifications and technical information relating to its products or processes without due notice. This document or the information therein, does not form part or parts of any contractual agreement relating to products quoted or supplied, nor forms part of any guarantee.

    Back to Finishes